ACKSYS offers a secure wireless solution that is quick and easy to install, allowing you to create a wireless bridge between two independent Ethernet networks, two separate devices (PC, camera, printer, etc.) or two buildings* by simply programming two Airlink_V2 standard units (download configuration files).

• Indoor use: wall mounting or DIN rail
• * Outdoor use: installation in an outdoor cabinet with antennas adapted to the environment and to the distance to be covered (consults the list of additional accessories).

Technical characteristics (for 1 device)

Ethernet interface	1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, auto MDI/MDIX cross-over, RJ45 Ethernet interface
WiFi interface	1 radio IEEE 802.11a/b/g/n, MIMO 2T2R, 2.4 / 5 GHz, ANI (Adaptive Noise Immunity)
WiFi radio data rate	802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps 802.11n: MCS0-7, 2 streams (6.5 to 300 Mbps)
Operating frequencies	ISM : 2.4-2.483 GHz (up to 14 channels) UNII : 5.15-5.25 GHz (up to 4 channels) UNII-2 : 5.25-5.35 GHz (up to 4 channels) UNII-2 ext : 5.470-5.725 GHz (up to 11 channels) UNII-3 : 5.725-5.825 GHz (up to 4 channels) Supports DFS and TPC
Output power	2.4 GHz : 23.5 dBm (aggregate) / 5 GHz : 21 dBm (aggregate)
Sensitivity max.	2.4 GHz : -94 dBm / 5 GHz : -96 dBm
Radio connectors	2 x RP-SMA
Security	Firewall, DoS, https, MAC filtering, WPA/WPA2-Personal & Enterprise (IEEE 802.1X/RADIUS), WEP, tunnels L2 (GRE), VPN (OpenVPN), SNMP V3, client isolation in AP mode
WiFi modes	Access point, client, MESH (IEEE 802.11s), infrastructure, AD-HOC, fast roaming (less than 30 ms), WMM QoS
Ethernet networking	Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay
Ethernet routing	Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router
Administration	http, https, SNMP agent (V1, V2C, V3), WaveManager administration software
LEDs Signaling	Radio : activity – status | Ethernet : link 10/100/1000 – activity | Power : on-off
Power supply	+9VDC to +48VDC, 3-pin Phoenix connector & PoE Powered Device 802.3af (from model V2)
Consumption	IDLE mode : 1.7 W / Maximum average : 5.8 W / Recommended power supply : 7 W
Dimensions & weight	Compact case L : 103 x l : 67 x h : 24 mm, weight 225 g
Standards and certifications	CE (RED) Safety : EN 62368-1:2014+A11, EN62311 EMC : EN301-489-1, EN301-489-17 Radio : EN 300 328 2.1.1 (2.4 GHz), EN 301 893 2.1.1 (5 GHz, DFS) FCC Radio : FCC ID Z9W-RMB Environmental Shocks and vibration : EN 61373 (CAT 1 CLASS B)
Environment	IP30 Operating temperature: -20°C to +60°C , storage: -40°C to +85°C, humidity: 0% to 99% (non-condensing)
Warranty	5 years

References to order

AirLink (2 units to order)	WiFi access point, client, repeater (WDS) and MESH point (IEEE 802.11 a/b/g/n), 10/100/1000 RJ45 Ethernet interface, shipped with two 2.4GHz – 3 dBi / 5GHz – 4 dBi antennas
Accessories WL-ANT-2458/3-ORPS PWS12-UNI-PH3 WL-FIX-RD2	Flat & swivel omnidirectional antenna, 2.4GHz (3dBi) / 5GHz (4dBi), RPSMA AC (110V / 220V) to 12VDC power adapter with cable terminated by a 3-pin Phoenix terminal block Din rail fixing kit