WLn-LINK-OEM

Ethernet interface

1-port Gigabit Ethernet 10/100/1000 Base TX auto-sensing, plug & play mode & auto MDI/MDIX cross-over, RJ45 or TTL Ethernet interface (HE10 connector)

Serial interface

One serial port (TTL level)

WiFi interface

1 radio IEEE 802.11 a/b/g/n, MIMO 3T3R, 2.4 / 5 Ghz

WiFi radio data rate

802.11a : 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b/g : 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
802.11n : MCS0-23, 3 streams (6.5 to 450 Mbps)

Operating frequencies

ISM : 2.4-2.483 GHz (up to 14 channels)
UNII : 5.15-5.25 GHz (up 4 channels)
UNII-2 : 5.25-5.35 GHz (up to 4 channels)
UNII-2 ext : 5.470-5.725 GHz (up to 11 channels)
UNII-3 : 5.725-5.825 GHz (up to 4 channels)
Supports DFS and TPC

Output power

Up to 24dBm (aggregate), depending on radio card model

Antennas

3 U.FL connectors

Security

IEEE 802.1x (RADIUS authenticator & supplicant), WPA2-PSK, WPA-PSK, WEP

WiFi Modes

Access point, client, repeater, MESH point (IEEE 802.11s), infrastructure, AD-HOC, client router, WMM QoS, multicast, dynamic routing and firewall modes fully supported, fast roaming (less than 30 ms), redundancy (VRRP)

Administration

Built-in WEB interface, SNMP agent, administration software for Windows/Linux (ACKSYS NDM)

LEDs Signaling

Radio : quality and activity | Ethernet : link 10/100/1000 and activity | Power : on-off | Product diagnostic

Power supply

+5VDC (+/- 5%), 8 Watts typical

Dimensions & weight

Small sized PCB, L: 103 x l: 57 x H: 20 mm, approx. 50g

Standards

Radio module CE and FCC certified. WLn-LINK-OEM has to be certified in the final product.

Environment

Operating temperature: -20°C to +70°C or -40°C to +85°C (for extended temperature range model)
Storage: -65°C to +100°C, Humidity: 5% to 95% (non-condensing)

Warranty

1 year

WLn-LINK-OEM-RJ/R

Access point, Ethernet bridge, repeater & Mesh point WiFi IEEE 802.11a/b/g/n module, without antenna nor antenna cable (MOQ = 10 units), RJ45 Ethernet interface, radio defined by the /R suffix

WLn-LINK-OEM-TTL/R

Same as above with TTL Ethernet Interface, radio defined by the /R suffix

WLn-LINK-OEM-EVAL/R

Evaluation kit containing the WLn-LINK-OEM-TTL module, an evaluation board, one WL-KIT-ANT-1a and a +12VDC power adapter (AC 110 / 240V), radio defined by the /R suffix

/R (radio) coding:

No suffix = 250 mW radio, 3T3R, -20°C to +70°C

          /3 = 250 mW radio, 3T3R, -40°C to +85°C

Additional accessories :

WL-ANT-2458/2-ORPS

WL-KIT-ANT-1a

C-Key_M2

Dual band (2.4 / 5 GHz) 2 dBi omni-directional RP-SMA antenna

1 RF cable (15cm) with 1 bi-band 2.4 / 5 GHz omnidirectional antenna 2 dBi (RP-SMA connector)

Save / Restore configuration key for the WLn-LINK-OEM