WLg-ABOARD

Ethernet link

2-port Ethernet 10/100 auto-sensing, waterproof Ultra-Lock® M12 connectors (D-coding), plug & play mode & auto MDI/MDIX cross-over

WiFi network

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, IEEE 802.11d support, dynamic Frequency Selection (DFS), “ClearVoice” band, transmission Power Control (TPC).

Data rate

Up to 108 Mbps (Super AG mode)

Channels

2.4 GHz (802.11b/g): 14 channels / 5 GHz (801.11a/h): 24 channels

Output power

Transmitter +20 dBm (TPC), +26 dBm with the [H4] option

Sensitivity

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

Antennas

Two 2dBi 2.4 / 5 GHz antenna, N-type connectors, optional lightning surge protection

Modulation

OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK

Security

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control

Modes

Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported

Administration

Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla …), SNMP agent, ACKSYS NDM

Operating systems

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

Alarms

Relay output warning: power failure, WLAN connection failure, Watchdog or user defined (SNMP)
1 FORM B solid state relay, 60V 0.15A (M12 power supply connector)

Signaling

LEDs signaling for LAN, WLAN network activity, 10/100 mode, MAIN & AUX power supply, C-Key

Power supply

9-72VDC, insulated 9-36VDC or 36-140VDC, dual input (M12 connector) or POE (IEEE 802.3af)

Consumption

8W typical power consumption, 10W with the 400mW radio

Dimensions & weight

Shockproof rugged aluminum enclosure, (L: 80 x l: 175 x h: 57 mm), 820 g with antennas

Standards

MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations)

EN 301489-17 & EN 61000-6-2 (CEM), IP66 seal rating, E-marked (2004/104), EN 50155

(IEC 60571) / EN 50121-3-2, EN 50121-4 (railways)

Environment

Operating temperature : -25°C to +70°C, extended -40°C to +80°C with [H4] option (HR 0-99%), storage : -40°C to +100°C

WLg-ABOARD/N [H4]

WiFi Access Point, 2-port Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, dual DC power input from +9VDC to +72VDC, shipped with 2 dual band 2 dBi omni-directional (2.4 / 5 Ghz), one set of 2 meters cables (M12 to RJ45 and M12 to stripped cables)

WLg-ABOARD/NP [H4]

Same as /N with POE IEEE 802.3af (without power cable)

WLg-ABOARD/NI [H4]

Same as /N with a dual DC insulated power input from +9VDC to +36VDC and alarm contact (relay)

WLg-ABOARD/NPI [H4]

Same as /N with a dual DC insulated power input from +36VDC to +140VDC, POE IEEE 802.3af, alarm contact (relay)

ACCESSORIES

C-Key_M1

Save / Restore configuration key for the WLg-ABOARD

[H4] option

H4 means high power version (400mW) and extended temperature range (-40°C to +75°C)

WLg-ANT-LSP-N

Lightning Surge Protector 50 Ohms N-Type antenna 5 KA (0-6 GHz)

WL-PLT-1

4-point fixing plate with ground lug

M12 CABLE REFERENCES

Waterproof M12 Ethernet cables
(x = 2, 5 or 10 meters)

 Waterproof M12 Power supply cables
(x = 2, 5 or 10 meters)

WLg-ABOARD/N V3 & above

WLg-M12U-ETH-xM (ultra-lock, 4-pole) 

WLg-M12U-PWR-xM (ultra-lock, 4-pole) 

WLg-ABOARD/NP V3 & above

 WLg-M12U/8-ETH-xM (ultra-lock, 8-pole)

WLg-M12U-PWR-xM (ultra-lock, 4-pole)

WLg-ABOARD/NI

WLg-M12U-ETH-xM (ultra-lock, 4-pole)

WLg-M12/6-PWR-xM (6-pole)

WLg-ABOARD/NPI

WLg-M12U/8-ETH-xM (ultra-lock, 8-pole)

WLg-M12/6-PWR-xM (6-pole)