WLg-xROAD/N

Ethernet link

10/100 auto-sensing Ethernet port (terminal block inside the enclosure), plug & play mode & auto MDI/MDIX cross-over

WiFi network

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among existing networks; “ClearVoice” band provides non-overlapping channels for fast data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on ATHEROS’s AR5414 (AR5006XS) chip set.

Data rate

Up to 108 Mbps (Super AG mode)

Channels

13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)

Output power

Transmitter +20 dBm (TPC)

Sensitivity

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

Antenna

One 2dBi 2.4 / 5 GHz antenna, RP-SMA connector

Modulation

OFDM: BPSK, QPSK, 16QAM, 64QAM and DSSS: DBPSK, DQPSK, CCK

Security

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS authenticator & supplicant), MAC addresses filtering, SSID broadcast control

Modes

Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & fast roaming (less than 50 ms) modes are supported

Administration

Thanks to its built-in WEB interface, the setup of the device is achieved using any web browser installed on your computer (Internet Explorer, Netscape, Mozilla …), SNMP agent, ACKSYS NDM

Operating systems

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

Signaling

LEDs signaling for LAN, WLAN network activity, 10/100 mode, power supply

Power supply

DC power supply (+9VDC to +50VDC) or POE IEEE 802.3af (for the /NP model)

Consumption

3.6W typical power consumption, 4W for the /NP model

Dimensions & weight

Shockproof rugged aluminum enclosure, (L: 115 x W: 64 x H: 35 mm), 370 g with the cable and without the antenna

Standards

MIL-STD-810F method 514.5 & 516.5 (shocks & vibrations), IP65 seal rating

EN 301489-17 & EN 61000-6-2 (CEM), E-marked (2004/104)

Environment

Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C to +80°C

WLg-xROAD/N

WiFi Access Point, Ethernet Bridge & WDS Repeater (a/b/g/h) for automotive applications, power input from +9VDC to +50VDC, shipped with 1 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenna and 2 meters of Ethernet RJ45 cable

WLg-xROAD/NP

Same as above with the power over Ethernet option (IEEE 802.3af)