Ethernet link

2-port Ethernet 10/100 auto-sensing; RJ45 connectors; plug & play mode & auto MDI/MDIX cross-over
  

WiFi network

Compliant to the IEEE 802.11a/b/g/h 2.4 / 5 / 5.4 GHz standards, multi-country Roaming support (IEEE 802.11d); Dynamic Frequency Selection (DFS) support provides flexible selection of best frequency to allow mobility among all existing IEEE 802.11a/b/g/h networks; “ClearVoice” band provides non-overlapping channels for fast-speed data transmission; Transmission Power Control (TPC) offers flexibility to adjust RF output power, based on the ATHEROS AR5414 (AR5006XS) chip set

Radio data rate

Up to 108 Mbps (Super AG mode), TCP user data rate up to 44 Mbps

Channels

13 channels (b/g modes), 8 channels (a mode), 11 channels (h mode)
Number of channels may vary depending on local laws.

Output power

Transmitter +20 dBm (Optional 26 dBm)

Sensitivity

Receiver -92 dBm for IEEE 802.11 a/g and -95 dBm for IEEE 802.11b

Antenna

One 2dBi 2.4 / 5 GHz antenna (RP-SMA connector) + one RP-SMA connector for an additional antenna (diversity mode)

Modulation

OFDM : BPSK, QPSK, 16QAM, 64QAM et DSSS : DBPSK, DQPSK, CCK

Security

64/128 bits WEP, WPA-PSK, WPA2-PSK, IEEE 802.1x (RADIUS supplicant & authenticator), MAC addresses filtering, SSID broadcast control

Modes

Access point to build a WiFi network infrastructure, Bridge to connect any Ethernet equipments to this network and MODBUS/TCP wireless gateway, repeater (WDS), infrastructure, AD-HOC, bridge router & rapid roaming (less than 50 ms) modes are supported

Administration

Built-in WEB interface; SNMP V2c agent; ACKSYS NDM (Networking Device Manager).
ACKSYS unique “C-Key” allows for quick and easy on-site replacement of the WLg-IDA unit, eliminating the need to reconfigure the replacement part or to use any other equipment (optional)

Operating systems

Windows, Linux, UNIX as well as any operating system supporting TCP/IP

Protocols

Ethernet TCP/IP & UDP, MODBUS/TCP, Ethernet/IP, PROFINET …

Signaling

Led display for power supplies, LAN on each port & WLAN activity, radio receive level

Alarms

Relay output warning: power failure, LAN or WLAN connection failure, Watchdog.
1 FORM B solid state relay, 60V 0.15A, contacts on removable clamp cage terminal

Power supply

PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input (removable clamp cage terminal)

Consumption

4.5 Watts typical

Dimensions & weight

Shock & vibration proof metal enclosure (L: 110 x W: 50 x H: 120 mm), 570 g

Standards

MIL-STD-810F, 514.5 & 516.5 methods (shocks & vibrations)

EN 301489-17 & EN 61000-6-2 (EMC)

Environment

Operating temperature: -20°C to +70°C (-4°F to 158°F), storage: -65°C to +100°C (-85°F to 212°F),
Humidity: 5% to 95% (non-condensing), IP 30 seal rating

WLg-IDA/N

WiFi Access Point, 2-port Ethernet Bridge & WDS Repeater (a/b/g/h), PoE IEEE 802.3af or +9VDC to +36VDC dual redundant power supply input, shipped with 1 dual band 2 dBi omnidirectional (2.4 / 5 GHz) antenna and 1 meter of Ethernet RJ45 cable

C-Key_M1

Save / Restore configuration key for the WLg-IDA/N

WLg-RF400MW

High power radio option (26 dBm, 400 mW)

WLg-FIX-PLQ

Panel fixing metallic plate

CAB-RJ45-1M

1 meter Ethernet RJ45 cable, straight